Rear view camera 3. Brake Light + 4.3'' Monitor for VW Crafter Mercedes Sprinter

  
Video & TV in Car. Brake Light + 4.3'' Monitor for VW Crafter Mercedes Sprinter. Caution: many vehicles now use pulse width modulation to warn the driver when a rear light has failed. This affects the power source of the reversing light, which can result in a poor signal for the retrofit camera. Our signal filter stabilises this signal and ensures that the camera provides a reliable flicker-free image.

TOP FEATURES AT A GLANCE. The optimal complete set for VW Crafter & Mercedes Sprinter, consisting of.

Rear view camera in 3rd brake light specifically for use with these transporters. 4.3 TFT LCD Monitor for the dashboard. Perfect setting the field of view due to the adjustable camera angle. Integrated infrared diodes support the vision even in total darkness.

TFT LCD Monitor with Auto-On function. Easy installation with adhesive pad. High-quality workmanship and very visually appealing design. Set: 3rd Brake Light Mount Rear View Camera + 10.9cm (4.3) Stand-Alone Monitor for VW Crafter & Mercedes Sprinter. The common problem: On vehicles with rear doors can not readily a rear view camera are mounted.

It now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal rear view camera would capture this curvature and thereby collapse but the trailer coupling, the footboard or the bumper.

The rear view camera specifically integrated into the 3rd brake light lens allows, the view of the curvature and thus acquires the entire back wall, bumpers etc. Only this precise maneuvering possible, especially if it is only a few centimeters. The camera module can be positioned vertically at an angle to adjust and can be perfectly adapted to the conditions on your vehicle. The High Performance Digital Super Clarity Image Sensor enables optimal image reproduction, the integrated infrared lighting supports the view even in the dark. Unlike normal construction cameras this is directly integrated into the brake lights glass and fits well into the overall vehicle image, and in addition it is practical.

The supernatant, the camera module can be perfectly adapted to the respective vehicle. In order to obtain optimum playback even in the dark infrared diodes have been integrated. These allow a representation of the near zone behind the vehicle. Of course, one was conscious in the development of the special requirements for such a camera, so the camera module corresponds to protection class IP68 and is completely water and dust resistant. High-resolution 4.3 inch (10,9cm) TFT LCD Monitor for the dashboard.

This TFT is specifically tailored to the requirements in vehicles. You can easily attach the supplied adhesive pad on the dashboard monitor. The system has an auto-on function, ie as soon as a video signal is present, the image is automatically displayed on the monitor. When reverse gear is engaged, the monitor turns on automatically and displays the image from the reversing camera. View to the rear Depending on the roof construction and installed trailer hitch of the vehicle can not see on the monitor the towbar.

Avoid interference with our signal filter. Vehicles newer date use to power the vehicle exterior lighting (rear light, brake light etc) clocked a (pulsating) voltage, which is suitable for image sensors / video electronics and has functional or image disorders. Therefore, please close the connection cable to activate the rear view camera is not directly to the reversing light but use our signal filter. A suitable signal filter, see accessories. Vertical adjustment of the camera: 20%. Dimensions Monitor without bezel: 12 x 7.5 x 1.5 cm. Light sensitivity: 0 Lux (with IR ON). Cam resolution: 648 x 480 px. Color resolution: 480 TV lines. Operating temperature: -30°C - 70°C. Reversing camera (with 4-pin plug + screw cap) with. LCD TFT Monitor (17.8cm / 7 inch).

With factory fitted third brake light. The article is compatible with the vehicle configurations listed below. Alle anderen Werksradios oder Navis mit CD-Wechslersteuerung.

Alle anderen Werksradios oder Navis ohne CD-Wechslersteuerung. RCD 3002 (Audio 20 NTG 2.5). RCD 4001 (Audio 20 NTG 2). RNS 4001 (APS 50 NTG 2). RNS 5001 (Comand APS NTG 2). RNS 6000 (Audio 15+Becker MAP PILOT). Some of our customers reviews. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras". The seller is "www_maxxcount_de" and is located in this country: DE. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

• Brand: maxxcount
• EAN: 4047442069734