Crafter Mercedes Sprinter

Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter

Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter
Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter

Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter  Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter

Video & TV in Car. Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter. Caution: many vehicles now use pulse width modulation to warn the driver when a rear light has failed. This affects the power source of the reversing light, which can result in a poor signal for the retrofit camera.

Our signal filter stabilises this signal and ensures that the camera provides a reliable flicker-free image. TOP FEATURES AT A GLANCE. Rear view camera specially designed for use on vans. Easy replacement for the factory 3rd brake light glass. Vertical detection angle adjustable for perfect setting of the visual field.

Can be used with all monitors, which do have an RCA video input. Quality workmanship and attractive design. Color rear view camera especially for commercial vehicles Mercedes Sprinter & VW Crafter. The common problem: On vehicles with rear doors can not readily a rear view camera are mounted.

It now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal rear view camera would capture this curvature and thereby collapse but the trailer coupling, the footboard or the bumper.

The rear view camera specifically integrated into the 3rd brake light lens allows, the view of the curvature and thus acquires the entire back wall, bumpers etc. Only this precise maneuvering possible, especially if it is only a few centimeters. The camera module can be positioned vertically at an angle to adjust and can be perfectly adapted to the conditions on your vehicle. The high performance Digital Super Clarity Image Sensor enables optimal image reproduction, the integrated infrared lighting supports the view even in the dark.

Unlike normal construction cameras this is directly integrated into the brake lights glass and fits well into the overall vehicle image, and in addition it is practical. The supernatant, the camera module can be perfectly adapted to the respective vehicle.

In order to obtain optimum playback even in the dark infrared diodes have been integrated. These allow a representation of the near zone behind the vehicle. Of course, one was conscious in the development of the special requirements for such a camera, so the camera module corresponds to protection class IP68 and is completely water and dust resistant.

View to the rear Depending on the roof construction and installed trailer hitch of the vehicle can not see on the monitor the towbar. Avoid interference with our signal filter.

Vehicles newer date use to power the vehicle exterior lighting (rear light, brake light etc) clocked a (pulsating) voltage, which is suitable for image sensors / video electronics and has functional or image disorders. Therefore, please close the connection cable to activate the rear view camera is not directly to the reversing light but use our signal filter. A suitable signal filter, see accessories. Play on the plant-Navi in my rear view camera -Interface (optional) Do you want the image of the rear view camera conveniently play on your existing monitor your factory navigation system, so you will also need a rear view camera interface. Vertikale Einstellbarkeit der Kamera: 20%.

Lunghezza del cavo: 10 m. Picture sensor: Color sensor, 1/3 CMOS.

Light sensitivity: 0 Lux (with IR ON). Cam resolution: 648 x 488 px. Color resolution: 580 TV lines. Operating temperature: -30°C - 70°C. Rear Camera & Video Cable (10m).

With factory fitted third brake light. The article is compatible with the vehicle configurations listed below. Alle anderen Werksradios oder Navis mit CD-Wechslersteuerung. Alle anderen Werksradios oder Navis ohne CD-Wechslersteuerung. W907 / W910 (ab 2018). RCD 3002 (Audio 20 NTG 2.5). RCD 4001 (Audio 20 NTG 2). RNS 4001 (APS 50 NTG 2). RNS 5001 (Comand APS NTG 2). RNS 6000 (Audio 15+Becker MAP PILOT).

Some of our customers reviews. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras". The seller is "www_maxxcount_de" and is located in this country: DE. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

  • Brand: AMPIRE
  • Manufacturer Part Number: KV-SPRINTER-4G
  • EAN: 4047442062988


Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter  Rear view camera in 3rd brake light for VW Crafter and Mercedes Sprinter